1. Gear Material：Carbon steel, stainless
steel, Alloy steel, Copper(40Cr 40CrMo
20CrMnTi 20CrNiMo 45#steel)
2. Gear Size: by drawings
4. Bore: Finished bore
5. Module: 0.6~8
6. Heat Treatment: Harending & Tempering
7. Teeth Hardened: Hardness 55-65 HRC
8. Processing:Forging, hobbing, precision
machining, heat treatment, surface
- Main Parameters
An internal gear can be described as the opposite of an external gear, where the tooth points rather than away from the center, and takes the opposite position to the tip and the root of the tooth. The internal gear provides a compact parallel shaft transmission drive with large speed cuts. The ratio of using a standard spur gear is the same for the two external gears, but the center distance is smaller. In the case, it is necessary to have two parallel shafts rotating in the same direction, and the internal gear eliminates the use of idler gears.
Internal gears have several advantages when properly applied. One of the benefits is that the sliding effect is reduced. The corresponding tooth surfaces of the internal gear and the pinion gear are closer to the same length than when the external gear and the pinion gear have the same gear ratio and tooth length. Therefore, the relative slip of the teeth is less inside the case. This point brings up one of the advantages of using internal gears. The sliding action of one tooth on the other tooth causes friction; since friction causes tooth wear, it is advisable to reduce the sliding action.
Internal Gear Ring
Products can be customized.
45#Steel,20CrMnTi,40Cr,20CrNiMo,20MnCr5,GCR15SiMn,42CrMo,2Cr13stainless steel, Nylon, Bakelite, Copper, Aluminums, etc.
The main process is gear shaping.
Carburizing and quenching, High-frequency quenching,Nitriding, Hardening and tempering, Selecting heat treatment according to the different materials.
Rockwell hardness tester 500RA, Double mesh instrument HD-200B & 3102,Gear measurement center instrument CNC3906T and other High precision detection equipment.
DIN, ASTM, GB, JIS, BS
Used in printing machine, cleaning machine, medical equipment, garden machine, construction machine, electric car, valve, forklift, transportation equipment and various gear reducers, etc.
According to customer's request
Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or CNY), or samples.
Q2: Are you a trading company or factory?
A: Vanhon is a trading and factory located in Qingdao and Taian, Shandong.
Q3: What is your terms of payment?
A: T/T 30% in advance, and 70% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, Vanhon has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic well-known steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the furnace number of steel will be well-managed in our ERP system to ensure the traceability of our products.
Q6: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q7: What are your terms of delivery?
A: EXW, FOB Qingdao.